Workcentre 7335 touch screen misalignment
Options
1. Turn off the copier.
2. Hold 0-1-3 at the same time and turn on the copier. (Don't let go of 0-1-3)
3. You will see a screen with 4 boxes and in the boxes there will be P1 through P9 in the corners.
4. Tap on each one starting with P1 in sequence to P9.
5. Next screen will be a test screen which you will be able to tap anywhere to see if it aligns correctly.
6. Turn off copier for 30 sec and restart.
This should fix the misalignment. If not redo the process again until you are happy with it. This sometimes take 2 or 3 tries, but it works.
Options
1. Turn off the copier.
2. Hold 0-1-3 at the same time and turn on the copier. (Don't let go of 0-1-3)
3. You will see a screen with 4 boxes and in the boxes there will be P1 through P9 in the corners.
4. Tap on each one starting with P1 in sequence to P9.
5. Next screen will be a test screen which you will be able to tap anywhere to see if it aligns correctly.
6. Turn off copier for 30 sec and restart.
This should fix the misalignment. If not redo the process again until you are happy with it. This sometimes take 2 or 3 tries, but it works.
No comments:
Post a Comment